MagicTouch is developed with Nanolute Technology which possesses unique circumferential coating technology that facilitates homogeneous drug distrubation to target lesions.
Concept of treating with leaving Nothing behind in patients with highly susceptible restenosis rate due to inherent disease conditions and comorbid conditions.
Addresses the issue of metal to artery ratio by allowing one stent technique and less complications in side branch.
Addresses the issue of restenosis by homogenous drug distribution without further increasing metal load in diffuse, focal and edge stenosis.
Helps in treating challenging anatomies in small diameter without loosing lumen diameter.
Magic Touch is developed with Nanolute Technology which possesses unique circumferential coating technology that facilitates homogeneous drug distribution to target lesions
Circumferential Coating is performed under Low Pressure inflation leading to 100% surface area coating
3 Folds
Homogeneous Drug Delivery due to Circumferential Coating
DRUG/EXCIPIENT | |
Drug | Sirolimus |
Drug Dose | 1.27µg/mm² |
Drug Carrier | Phospholipid Based Excipient |
Balloon | |
Balloon Material | Polyamide |
Catheter design | Rapid Exchange(RX) Design |
Delivery system | |
Shaft Diameter – Proximal | 1.7 F |
Shaft Diameter – Distal | 2.5 F |
Usable Catheter Length | 140 cm |
Tip Profile | 0.016” |
Nominal Pressure | 6 bar |
Rated Burst Pressure | 16 bar (14 bar for 4.00/ 25 to 40 mm) |
Guiding Catheter Compatibility | 6F |
Guidewire Compatibility | 0.014” maximum recommended |
Diameter/Length | 10 mm | 15 mm | 20 mm | 25 mm | 30 mm | 35 mm | 40 mm |
---|---|---|---|---|---|---|---|
1.50 mm | CMT15010 | CMT15015 | CMT15020 | CMT15025 | CMT15030 | CMT15035 | CMT15040 |
2.00 mm | CMT20010 | CMT20015 | CMT20020 | CMT20025 | CMT20030 | CMT20035 | CMT20040 |
2.25 mm | CMT22510 | CMT22515 | CMT22520 | CMT22525 | CMT22530 | CMT22535 | CMT22540 |
2.50 mm | CMT25010 | CMT25015 | CMT25020 | CMT25025 | CMT25030 | CMT25035 | CMT25040 |
2.75 mm | CMT27510 | CMT27515 | CMT27520 | CMT27525 | CMT27530 | CMT27535 | CMT27540 |
3.00 mm | CMT30010 | CMT30015 | CMT30020 | CMT30025 | CMT30030 | CMT30035 | CMT30040 |
3.50 mm | CMT35010 | CMT35015 | CMT35020 | CMT35025 | CMT35030 | CMT35035 | CMT35040 |
4.00 mm | CMT40010 | CMT40015 | CMT40020 | CMT40025 | CMT40030 | CMT40035 | CMT40040 |